| How it works: |
| |
The operator must set up the computer with the basic inputs: pitch, diameter, n° of loops per length, n° of lengths ; then he has to put the product directly under the carter and press the foot-switch. |
| |
The machine automatically unwinds the spool, cuts the length in the wished n° of loops and carries it on a magnetic oscillating arm. The same arm puts each length into the inferior part of the binding tool, where it is strongly held thanks to a set of microteeth. |
| |
The R622 then closes like a pience the inferior and superior part of the tool, so that the spiral is pushed into the holes of the product and the points and tails are closed simultaneously. |
| |
If necessary it can meanwhile insert the hanger by mean of a semiautomatic hanger feeder. |
| |
The result is a very precise and fast binding with big diameters and big thickness, even if the holes of the block of sheets have not been perfectly aligned. |
| |
|
| Features: |
| • |
Binds pre-punched calendars or books from 1/4" (3:1") up to 1" (2:1").Using WireBind Rilematic® |
| • |
Wires continuous in spools for a maximum binding thickness of 24 mm (check binding table) |
| • |
Maximum Hanger length : 300 mm |
| • |
Maximum binding length: 600 mm. |
| • |
Skip binding up to 5 pieces, even with different number of loops if required. |
| • |
Dedicated profiled binding tools for each diameter. |
| • |
Machine speed is over 1200 cycles per hour. Effective productivity depends on operator skill and on the products' features. |
| |
|
| Complete with: |
| • |
One binding tool according to your choice |
| • |
Automatic spool unwinder and integrated loose-paper rewinder |
| • |
Microprocessors controlled operations |
| • |
Total bindings counter |
| |
|
| Optionals: |
| • |
Size tool sets: 1/4" to 1". |
| • |
Semiautomatic feeder for hanger from 100 up to 300 mm. |
| |
|
